EZRUN MAX10 G2 80A ESC Speed Controller 

Introducing the Hobbywing EZRUN MAX10 G2 - 80A Speed Control.

Compared with the previous generation, the Max10 G2 not only has strong explosive power and stable output power, but also has excellent low-speed linearity. It can not only easily realize violent start-up, straight-line high-speed, flying slopes, but also smooth low-speed walking

It supports turbo timing adjustment up to 32 degrees . It has a significant turbo timing effect when paired with EzRun 3652/3665 G3 , and the maximum speed can be increased by about 25% .

Patented frameless fan + smart start-stop technology

The side of the frameless fan has a large flow of air,blowing heat away from the integrated case radiator quickly.
Intelligent start-stop technology, intelligent start-stop fan,when the temperature is low, the fan is not activated, reducing noise and saving power; when the temperature rises to a certain level, the fan is activated to effectively dissipate heat.

Dynamic data acquisition

As convenient as ever.
After connecting the ESC to the OTA Bluetooth module , you can check the throttle, voltage, current, temperature, speed and other data in real time through the mobile APP to know the power running status; you can also grasp the power .

IP67 protection, 24/7 operation

The new induction line interface is waterproof design, the overall protection level is IP67 , and it can operate in various climatic conditions and harsh environments. Note: This ESC also supports sensored motors with common interfaces, and you need to purchase an adapter cable to realize it.

Product Specifications

General:

• Scale: 1/10th
• Brushed/Brushless: Brushless (BL)
• Sensored/Sensorless: Sensorless (SL)
• Waterproof: Yes

Electrical Specifications:

• Continuous / Peak Current: 80A / 520A
• Input Voltage: 2S - 3S LiPo
• BEC Output: Switch Mode - 6V / 7.4V, 5A

Wires & Connectors:

• Input Wires:
  • Red: 12AWG - 150mm
  • Black: 12AWG - 150mm
• Output Connectors: XT60
  (Note: Wire lengths listed are original, not visible length when installed.)

Cooling System:

• Fan Size: 25x25x10mm
• Voltage Range: 5V - 7.4V
• Powered by: BEC

Programming & Firmware:

• SET Button on ESC: Not Supported
• LED Program Box: Supported
• LCD Program Box: Supported
• Program Port: Independent Programming Port
• Firmware Upgrade: Supported

Size & Weight:

• ESC Dimensions: 53mm x 39.5mm x 37.2mm
• Weight: 120g (Including wires and plug)

Applications:

• Supported Motors: Sensorless Brushless Motor / Sensored Brushless Motor
• Recommended Vehicles: 1/10th Scale Flat Road, Off-Road, Short Course
• KV Rating / Motor Limitations:
  • 2S LiPo: KV ≤ 6000KV
  • 3S LiPo: KV ≤ 4200KV (3652 size motor)