EZRUN MAX10 G2 140A ESC Speed Controller

Introducing the Hobbywing EZRUN MAX10 G2 - 140A Speed Control

Born for Performance & Precision

The Hobbywing EZRUN MAX10 G2 ESC is designed to take your RC experience to the next level. Compared to its predecessor, the MAX10 G2 delivers stronger acceleration, stable power output, and improved low-speed control—perfect for aggressive launches, high-speed runs, and smooth low-speed maneuvers.

Enhanced Turbo Timing for More Speed

Supporting turbo timing adjustments up to 32 degrees, the MAX10 G2 delivers up to 25% more speed when paired with EzRun 3652/3665 G3 motors. Whether you're blasting down straightaways or clearing jumps, this ESC ensures maximum performance.

Patented Frameless Fan + Smart Start-Stop Technology

• High-efficiency cooling: A frameless fan design optimizes airflow, rapidly dissipating heat through the integrated metal case radiator.
• Intelligent Start-Stop Fan: The fan activates only when needed—reducing noise, conserving power, and improving longevity.

Dynamic Data Acquisition & Real-Time Monitoring

• Stay in control. When connected to the OTA Bluetooth module, the ESC provides real-time data tracking via the Hobbywing mobile app, including throttle response, voltage, current, temperature, and speed.
• Monitor your system on the go and fine-tune your settings anytime, anywhere.

IP67 Waterproof Rating – Built for All Conditions

Designed for all-terrain performance, the MAX10 G2 features an IP67-rated waterproof enclosure, making it resistant to dirt, dust, and moisture. It’s ready to perform in any climate or racing environment.
Note: This ESC supports sensored motors with common interfaces, but an adapter cable is required.

Advanced Tuning & Built-in Competition Modes

• 26 Adjustable Parameters, including throttle and brake frequency, softening, Boost/Turbo timing, and more—giving racers precise control over power delivery.
• Two Competition Modes:
  • Zero Timing Mode (Blinky) for Spec Racing
  • Modified Mode for Maximum Performance

Built-in High-Voltage BEC for Demanding Setups

• The MAX10 G2 includes a switch-mode BEC with adjustable voltage (6V/7.4V) and a max output of 3.5A, ensuring reliable power for high-torque servos and receivers.

OTA Bluetooth Module for Wireless Programming

• No need for wired programming! Connect the ESC to the OTA Bluetooth module and use the Hobbywing mobile app for parameter adjustments, data logging, and firmware updates—all from your smartphone.

**Warning: Please read the ESC manual carefully before use. Incorrect settings may cause damage to the ESC or motor.**

Product Specifications

General:

• Scale: 1/10th
• Brushed/Brushless: Brushless (BL)
• Sensored/Sensorless: Sensorless (SL)
• Waterproof: Yes

Electrical Specifications:

• Continuous / Peak Current: 140A / 880A
• Input Voltage: 2S - 4S LiPo
• BEC Output: Switch Mode - 6V / 7.4V, 5A

Wires & Connectors:

• Input Wires:
  • Red: 12AWG - 150mm
  • Black: 12AWG - 150mm
• Output Connectors: XT60
  (Note: Wire lengths listed are original, not visible length when installed.)

Cooling System:

• Fan Size: 30x30x10mm
• Voltage Range: 5V - 7.4V
• Powered by: BEC

Programming & Firmware:

• SET Button on ESC: Not Supported
• LED Program Box: Supported
• LCD Program Box: Supported
• Program Port: Independent Programming Port
• Firmware Upgrade: Supported

Size & Weight:

• ESC Dimensions: 53mm x 39.5mm x 37.2mm
• Weight: 120g (Including wires and plug)

Applications:

• Supported Motors: Sensorless Brushless Motor / Sensored Brushless Motor
• Recommended Vehicles: 1/10th Scale Short Truck, Truck, Monster Truck
• KV Rating / Motor Limitations:
  • 3S LiPo: KV ≤ 4000KV (3665 size motor)
  • 4S LiPo: KV ≤ 2600KV (4268 size motor)